Your Ultimate Guide for MEP & Facilities Management.

Practical guides, calculations and checklists for HVAC, Electrical, Plumbing and Facilities Management — completely free.

50+
Technical Articles
5
Disciplines
Free
Free MEP and FM Tools

Browse by Discipline

Expert MEP guides, calculations and engineering references — free for engineers and FM professionals

HVAC Systems

HVAC design guides covering air handling units, chillers, ductwork sizing, CFM calculations, cooling load analysis and energy-efficient system design.

Read HVAC guides →

Mechanical Systems

Mechanical engineering guides for pumping systems, pipe sizing, heat exchangers, boilers, pressure vessels, steam systems and thermal insulation.

Read Mechanical Guides →

Electrical Systems

Electrical engineering references for load calculations, LV panel design, power factor correction, capacitor banks, earthing systems and energy metering.

Read Electrical Guides →

Plumbing Systems

Plumbing design guides for domestic water supply, drainage systems, pipe material selection, booster pumps and hot water storage systems.

Read Plumbing Guides →

Facilities Management

FM strategy guides covering PPM planning, OPEX vs CAPEX budgeting, KPI frameworks, SFG20 maintenance schedules and building asset management.

Read FM guides →

Free MEP & FM Tools FREE

Online engineering calculators for AC tonnage, CFM, pump head, duct sizing and electrical load — plus SOP generator and PPM checklist builder.

Use free tools →

MEP & FM Glossary 150+

Searchable A-Z glossary of MEP and Facilities Management terms — HVAC, electrical, plumbing and FM definitions explained in plain English.

Browse Glossary →

Latest Guides & Articles

Real-world MEP engineering knowledge written by experienced Engineers

HVAC-Commissioning-Checklist-Practical-Site-Testing-Guide HVAC Commissioning Checklist: Practical Site Testing Guide - A new shopping centre is ready for handover. The AHUs are running, the chiller display shows 6.5°C chilled-water supply, and…
Expansion-Vessel-Maintenance-Complete-PPM-and-Sizing-Guide Expansion Vessel Maintenance: Complete PPM and Sizing Guide - The chilled water system pressure keeps dropping overnight. Your technician tops up the system, checks for visible leakage and confirms…
Transformer Maintenance Checklist Complete PPM Guide Transformer Maintenance Checklist: Complete PPM Guide - The transformer has been operating normally for years. There is no trip, no alarm and no complaint from the building.…
BMS Building Management System Complete Guide for FM Engineers BMS Building Management System: Complete Guide for FM Engineers - It is 2:00 PM and occupants on the third floor are complaining that the office is too warm. The BMS…
Single-Line-Diagram-Explained-How-to-Read-an-Electrical-SLD. Single Line Diagram Explained: How to Read an Electrical SLD - A tenant asks for a new 40 kW electrical connection. The contractor says there is a spare breaker in the…
Water Hammer in Plumbing Causes and How to Fix It Water Hammer in Plumbing: Causes and How to Fix It - A loud bang from your pipes after closing a tap is not a plumbing ghost. It is water hammer —…
💡

Have a Topic Suggestion?

I write practical MEP and FM guides based on real site experience. Tell me what topic you need covered and I will write it — completely free.

© 2026 MEP Master Guide. All rights reserved.
Built for engineers, by engineers. 🔧
Scroll to Top